Bear Upgrade / P3STEEL Orballo / Fan 45° 3D Printer Model Free Download

File formats: SLDPRT,STL

Download type: zip

Size:11.4MB

The file 'Bear Upgrade / P3STEEL Orballo / Fan 45° 3D Printer Model' is (SLDPRT,STL) file type, size is 11.4MB.

Description Files (20)

Summary

The upper rear bearing carrier no longer collides with the screws of the Orballo Printing P3STEEL chassis
There is more space on the tensioner to use self-locking M3 nuts
The screws have more length (+5mm) to tighten the screws holding the X axis rods (on old versions, the screw thread often broke for me)
The fan is tiltable
The arm that holds the fan vertically is thicker (3 to 5mm)
No more screws into plastic, only inserts ! 5x M344.2mm, 4x for 40mm fan, 1x for the part who hold cable (insert into X_carriage)
There is a allonged side on the motor holder part to allow the stallguard mode (endstop less)

Body_extruder.SLDPRT	1.9MB
Body_extruder.STL	1.3MB
Fan_angle.SLDPRT	354.1KB
Fan_angle.STL	282.2KB
Fan_shroud.SLDPRT	272.9KB
Fan_shroud.STL	55.8KB
Front_frame.SLDPRT	1.3MB
Front_frame.STL	608.2KB
X_carriage.SLDPRT	1.5MB
X_carriage.STL	543.9KB
X_carriage_back_bottom.SLDPRT	940.5KB
X_carriage_back_bottom.STL	554.4KB
X_carriage_back_top.SLDPRT	656.0KB
X_carriage_back_top.STL	172.0KB
X_carriage_left.SLDPRT	1.1MB
X_carriage_left.STL	396.7KB
X_carriage_right.SLDPRT	1.4MB
X_carriage_right.STL	532.0KB
X_Idler.SLDPRT	471.3KB
X_Idler.STL	131.7KB