Bear Coin Bank 3D Printer Model
The file 'Bear Coin Bank 3D Printer Model' is (stl) file type, size is 4.4MB.
The file 'Bear Coin Bank 3D Printer Model' is (stl) file type, size is 4.4MB.
Bear Coin Bank
Assembly is required.
Assemble instruction is in my youtube channel
https://youtu.be/njh3S9VZ788
No extra parts needed, which are can't make with 3D printer such as metallic springs, bolts and etc.
The parts are designed and tested to fit each other, however the tolerance is depends on a 3d-printer's condition.
Please remove the supports completely. May need a sandpaper or cutter while assemble the parts.
*Spiral Spring-V2 had been uploaded. (Stronger)
| Arm_Brown.stl | 1.0MB | |
| Arm_Shaft.stl | 484.2KB | |
| Arm_ShaftHead.stl | 24.9KB | |
| Arm_Slide.stl | 166.2KB | |
| Body_Brown.stl | 4.0MB | |
| Bottom_Peach.stl | 277.7KB | |
| Cap_Peach.stl | 773.8KB | |
| ClampNut_01.stl | 181.3KB | |
| ClampNut_02.stl | 181.3KB | |
| Eyes_Black.stl | 23.3KB | |
| Eyes_Gold.stl | 64.3KB | |
| Eyes_Gold_euro.stl | 126.6KB | |
| Eyes_White.stl | 311.0KB | |
| Eyes_White_euro.stl | 422.4KB | |
| Fish_Orange.stl | 1.4MB | |
| Foot_Black_01.stl | 987.1KB | |
| Foot_Black_02.stl | 851.8KB | |
| Head_Brown.stl | 559.5KB | |
| Head_Shaft_01.stl | 470.8KB | |
| Head_Shaft_02.stl | 470.4KB | |
| Head_Shaft_Head_Brown_01.stl | 25.1KB | |
| Head_Shaft_Head_Brown_02.stl | 25.1KB | |
| LowerJaw_Peach.stl | 330.6KB | |
| Nose_Black.stl | 180.6KB | |
| SpringV2_01.stl | 86.0KB | |
| SpringV2_02.stl | 86.0KB | |
| Spring_01.stl | 290.8KB | |
| Spring_02.stl | 292.2KB | |
| UpperJaw_Peach.stl | 257.0KB | |
| Uvula_Red.stl | 200.8KB |
