BEAM ME UP!
I was tired of not having designed anything recently; so I made this! The gear in the middle should spin and nothing else should require glue.
The sheep in the beam is a re-mix of these earring sheep. You'll need to scale it down 50% and print it slow but should not require any infill.
You'll want to print the bottom of the ship upside down with supports. The beam and Dome should be printed in vase mode. The beam is fine to print without a top or bottom layer.
This Thing is ripe for remixing. one idea is to simply make it bigger; Or just add lights at this scale with some small watch batteries.
| Base.stl | 174.2KB | |
| Beam.stl | 465.8KB | |
| Bottom.stl | 508.3KB | |
| Dome.stl | 266.3KB | |
| Gear.stl | 143.1KB | |
| sheep.stl | 1011.9KB | |
| Top.stl | 585.3KB |
