Baubles 2019 V2 3D Printer Model
The file 'Baubles 2019 V2 3D Printer Model' is (stl) file type, size is 23.7MB.
The file 'Baubles 2019 V2 3D Printer Model' is (stl) file type, size is 23.7MB.
Set of few christmas tree balls
12.XII.2022
Updated with V2 models
Thicker walls, more clean, easier to print and with new models
There is no 'hole' versions in V2
Hole versions are for supports for the top. You can use a plug then (not print-tested)
Full versions may be printed without infill if you have a good printer and set it right. (like maybe 2-3 walls but much more top skin layers, or smaller model size).
If you want you can print two halves (of Full versions) and glue it together.
On normal size you will need to lower the model on Z axis for 30mm for top half, and then for the bottom part rotate model by 180dgr and set Z = -37mm
Check my Thingiverse collection for more Christmas decorations
Or Cookie cutters
| Christmas_Ball_double-spiral.stl | 3.6MB | |
| Christmas_Ball_double-spiral_full.stl | 4.6MB | |
| Christmas_Ball_hole-plug.stl | 37.6KB | |
| Christmas_Ball_spiral-ring.stl | 2.7MB | |
| Christmas_Ball_spiral-ring_hole.stl | 2.6MB | |
| Christmas_Ball_spiral-thick.stl | 2.7MB | |
| Christmas_Ball_spiral-thick_hole.stl | 2.5MB | |
| Christmas_Ball_spiral.stl | 2.0MB | |
| Christmas_Ball_spiral_full.stl | 2.1MB | |
| v2Ball_double-spiral-rev_full.stl | 2.9MB | |
| v2Ball_double-spiral.stl | 2.5MB | |
| v2Ball_double-spiral_full.stl | 3.0MB | |
| v2Ball_spiral-rev-ring.stl | 3.6MB | |
| v2Ball_spiral-rev.stl | 3.6MB | |
| v2Ball_spiral-rev_full.stl | 2.3MB | |
| v2Ball_spiral-ring.stl | 1.4MB | |
| v2Ball_spiral.stl | 1.2MB | |
| v2Ball_spiral_full.stl | 2.3MB |
