Adder (Puma)

Code-named Puma by Inner Sphere forces who first engaged it, the Adder is a light Clan OmniMech that serves as a direct or an indirect fire-support unit in most of its configurations. The Adder is capable of carrying a relatively heavy weapons payload that can surprise an unsuspecting enemy, even at extreme ranges.

Prime Configuration

The Primary configuration adds a basic but powerful arsenal of two ER PPCs which are linked to an advanced targeting computer.

Alternate Configuration A

A long range missile support configuration, the Adder A has a pair of LRM-20 launchers, allowing it to bombard an enemy from long range. For close combat, the 'Mech has two small pulse lasers.

Alternate Configuration B

A long range sniping configuration, the B configuration carries an LB-X Autocannon/5 backed up by a highly accurate large pulse laser for long range engagements. To protect itself at close ranges, the Adder B has a pair of ER medium lasers. This was one of the configurations designed as a result of intelligence from Wolf's Dragoons

Alternate Configuration C

Another long range bombardment configuration, the Adder C has two LRM-15 launchers and takes advantage of their lack of a minimum range by carrying a Narc Missile Beacon that can attach homing pods to enemy 'Mechs for increased missile accuracy. For close range defense, the 'Mech has a single medium pulse laser.

Alternate Configuration D

Another long range sniper configuration, the Adder D has an ER large laser and UAC/5 for long range engagements, with a pair of Streak SRM-2 launchers to finish off any enemies who close with the 'Mech. This was one of the configurations designed as a result of intelligence from Wolf's Dragoons.

Alternate Configuration E

The E configuration has two ATM-9 launchers which can fire ammunition specialized for long, medium, and short ranges. For close combat, the 'Mech has an additional four micro pulse lasers.

Alternate Configuration H

The only true brawling configuration of the Adder, the H has two highly destructive heavy large lasers as its primary weapons backed up only by the fixed flamer. To help dissipate the 'Mech's heat, it has six additional double heat sinks. A Targeting Computer increases the accuracy of the heavy large lasers.

Alternate Configuration I

The Adder I carries an improved heavy medium laser and four ER medium lasers. An SRM-6 and a ton of ammunition is mounted in each side torso. To handle the heavy heat load, five extra heat sinks are installed, two in each arm and one in the left torso.

Alternate Configuration J

The Adder J carries the new Hyper-Assault Gauss 20 as its primary weapon, giving it a powerful punch. This is backed up by four Anti-Personnel Gauss rifles, which are capable of decimating infantry. This variant was first observed being used by forces from Clan Hell's Horses in action on Paulus Prime.

Alternate Configuration L

The L configuration is apparently a light striker variant. Each arm carries a pair of Streak LRM-5s and a ton of ammunition, while the side torsos carry a single ER medium laser. An ECM suite provides electronic warfare support, and six jump jets are installed for a 180 meter jump range.

Alternate Configuration S

The S configuration is an anti-infantry specialist. Each arm carries three machine guns, while each side torso carries five more machine guns, fed by one ton of ammunition is in each arm. For heavier targets, each arm carries a pair of medium pulse lasers. An ECM suite and active probe suppress radio reports and sensor data.

Alternate Configuration T

The T configuration carries an ER PPC with a PPC capacitor in each arm. An extra double heat sink is in the left torso, but to handle heavy heat loads the right torso carries a single coolant pod.

Alternate Configuration TC

The TC configuration was used in the Battle of Tukayyid. It carried five machine guns and a half ton of ammunition in each arm, supplemented by an active probe, small pulse laser, and anti-missile system in the left torso. The right torso carried a large pulse laser for use against hardened targets. The large and small pulse lasers are tied into a targeting computer.

This is a remix of the Adder ADR-Prime from Wolfking1985, I've removed the AMS as this is not canon. It prints best in Resin,however when I printed the first Adder its legs were too thin and I'd not cleaned up to "roof", I've now fixed these issues.