Battery Tray For Vanquish VRD Carbon With Stubby Kit 3D Printer Model
The file 'Battery Tray For Vanquish VRD Carbon With Stubby Kit 3D Printer Model' is (STL,x_t) file type, size is 172.1KB.
The file 'Battery Tray For Vanquish VRD Carbon With Stubby Kit 3D Printer Model' is (STL,x_t) file type, size is 172.1KB.
This battery tray is a low center of gravity option for the Vanquish VRD Carbon. It only works if you have the stubby kit installed. It is designed with a Zeee 1300 mah 3S battery.
This tray gets the battery as low as possible without sacrificing flex. You will lose a little up travel when the axle is moving straight, but that shouldn't be an issue with a crawler.
In order to fit the battery, this will slightly spread out the frame rails, so you will need some 2.5 or 3mm spacers for the bumpers and shock tower cross brace to work correctly.
You will also need 6 M3x6mm button head screws to replace the 8mm hardware that attaches to the frame. The 8mm hardware will be too long and contact the battery.
Message me on Instagram @shoddy.rc if you think of any improvements you want me to add.
| VRD_Battery_Tray.V2.STL | 206.5KB | |
| VRD_Battery_Tray.V2.x_t | 395.8KB |
