Battery Mockups 3D Printer Model
The file 'Battery Mockups 3D Printer Model' is (stl,scad) file type, size is 10.5KB.
The file 'Battery Mockups 3D Printer Model' is (stl,scad) file type, size is 10.5KB.
This is an AA battery mockup designed to replace AA batteries with an external
power source. You will need 2 one-sided PCB pieces. One with a 5 mm diameter
and another one with a 9 mm diameter. You will need to print 2 body and attach
one PCB piece at the end of each one. The 5 mm PCB piece will act as the
negative pole, while the 9 mm one as the positive pole. Some glue is needed to
attach the PCB pieces to the end of the battery mockups. You will also need a
soldering iron. You will need to solder a wire to each PCB piece.
Support material is not required. An infill of 20% is recommended.
This object main web page is:
http://www.ctheroux.com/battery-mockups/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.
| AABatteryBody.stl | 133.3KB | |
| BatteryBodies.scad | 1.8KB |
