Remix of Charlie Cao's "Battery Missle Launcher - Ejectable".
Battery storage Missile Turret can hold 18 AA's and 8 AAA's.
Small footprint with classic look! Can be presented as printed or painted for authentic "military grade" look.
Made 2 designs for the main magazine; one with a separate back that is glued one following printing. This allows for printing the main body with no supports.
All MK3 parts can be used with either MK3A or MK3B parts. Only need MK3A or MK3B printed depending on your preference.
Support struts have bolt-on and snap-on mods. Both work with either 3A or 3B. Only need to print one type. Can mix/match tops and bottoms.
Needs three small springs (approx. 5mm dia x 15mm). Also 3mm and 4mm screws/bolts depending on how you connect the parts. (See pics.)
| 110_Mk3A_Mag.stl | 1.1MB | |
| 110_Mk3B_Mag.stl | 1.2MB | |
| 110_Mk3B_Mag_Endcap.stl | 114.1KB | |
| 110_Mk3B_Mag_Ramrod_1.stl | 1.3MB | |
| 110_Mk3B_Mag_Ramrod_2.stl | 1.3MB | |
| 110_Mk3_Base.stl | 476.1KB | |
| 110_Mk3_Gear_Cover_L.stl | 159.6KB | |
| 110_Mk3_Gear_Cover_R.stl | 159.6KB | |
| 110_Mk3_Mag_Cover.stl | 56.3KB | |
| 110_Mk3_Mag_Cover_Comp_Gear_L.stl | 211.2KB | |
| 110_Mk3_Mag_Cover_Comp_Gear_R.stl | 211.2KB | |
| 110_Mk3_Mag_Cover_Gear.stl | 42.6KB | |
| 110_Mk3_Mag_Cover_Latch.stl | 23.3KB | |
| 110_Mk3_Piston_Cyl_Type_1.stl | 1022.5KB | |
| 110_Mk3_Piston_Cyl_Type_2.stl | 100.1KB | |
| 110_Mk3_Piston_Rod_Type_1.stl | 1.1MB | |
| 110_Mk3_Piston_Rod_Type_2.stl | 253.8KB | |
| 110_Mk3_Pivot_Clutch.stl | 43.2KB | |
| 110_Mk3_Pivot_Pin.stl | 18.1KB | |
| 110_Mk3_Shell.stl | 180.3KB | |
| 110_Mk3_Side_Cover_L.stl | 173.2KB | |
| 110_Mk3_Side_Cover_R.stl | 173.2KB | |
| 110_Mk3_Yoke.stl | 723.6KB | |
| 110_Mk3_Yoke_Cyl.stl | 147.7KB | |
| 110_Mk3_Yoke_Post.stl | 26.4KB |
