Battery Holder For 4s 26650 Pack 3D Printer Model
The file 'Battery Holder For 4s 26650 Pack 3D Printer Model' is (stl) file type, size is 572.5KB.
The file 'Battery Holder For 4s 26650 Pack 3D Printer Model' is (stl) file type, size is 572.5KB.
This is a battery holder for a 4s pack of 26650 size cells. I made this primarily for powering my Sound Devices MixPre-D, but you could use it for other stuff too. It consists of 3 parts.... a case, an inner support that holds the threaded inserts, and a cap to mount the switch, voltmeter, and power connector.
If you don't want to use the Hirose connector, the hole will fit a coaxial power connector just fine. I've included an STL for the cap that has no cutouts, so you can make your own.
Parts list:
8 6-32 threaded inserts on the part labeled "4s V2 Inner": (McMaster PN 93365A132)
8 Button head socket cap 6-32 x 3/8in screws
1 Mini rocker switch whose part number is "MINI1SW" (hole is 9mm x 14mm)
1 Hirose connector part number: HR10A-7R-4S (hole is 8.5 mm diameter)
1 Mini LED voltmeter (hole is 23mm x 15mm)
| 4s_V2.Case.stl | 449.1KB | |
| 4s_V2_Cap-Blank.stl | 513.2KB | |
| 4s_V2_Cap.stl | 540.5KB | |
| 4s_V2_Inner.stl | 154.8KB |
