Battery Holder 4xAA Square 3D Printer Model
The file 'Battery Holder 4xAA Square 3D Printer Model' is (stl) file type, size is 25.9KB.
The file 'Battery Holder 4xAA Square 3D Printer Model' is (stl) file type, size is 25.9KB.
Just another battery support, but square. It is based on 4 AA batteries.
For connections I used the leftover crimp connectors (https://www.pololu.com/product/1931) .
To stay glued connections, you can push softly the metal part into the plastic with the hot soldering iron (the welder mustn't touch plastic) to soften it a little. That and black tape should be well attached.
------------------------------------------------- (ES)
Otro soporte para baterÃa, pero en cuadrado. Es para 4 pilas tipo AA.
Para las conexiones he usado el sobrante de los conectores para crimpar (https://www.pololu.com/product/1931).
Para que se queden pegadas las conexiones, con el soldador caliente empujamos suavemente la parte de metal hacia el plástico (sin que el soldador toque el plástico) para que lo reblandezca un poco. Con eso y cinta negra deberÃa quedar bien pegado.
| AA_4_inCube_base.stl | 62.2KB | |
| AA_4_inCube_top.stl | 63.1KB |
