DT-03 ALUMINUM BATTERY BAR is required to install this part.
https://www.tamiya.com/english/products/54564/index.html
To join Hinge A and B, use M3x15mm screws.
If you do not need a hinge mechanism, then insert a cover catch instead of a hinge. Or you may choose not to use both. If both are not used, a battery plug can be inserted through the open hole.
If the battery is difficult to insert or remove, rotate the dust shield.
When 3D printing, it is better to place the object as shown in the figure. It can provide less support.
| BatteryCover_Meshed.stl | 136.1KB | |
| CoverCatch_Meshed.stl | 5.6KB | |
| FrontDustShild_Meshed.stl | 217.0KB | |
| HingeA_Meshed.stl | 61.3KB | |
| HingeB_Meshed.stl | 38.6KB |
