All credits to Bradk3 for the idea.
Battery Dispenser for AAA, AA and 9V batteries, 152,5x127x58mm
I did not like the screw-holes on the side of the original Battery holder, so I decided to redesign the battery holder. The screw-holes are now hidden on the inside.
I had to print the dispencer twice:
I have added radii to improve stiffness, strength and printability. It can be printed without support except for the Skadis design. Print it straight up, the bottom touching the printbed.
Update 6-01-2023 Upon request: Added a design for the Ikea Skadis board. John, thanks for testing!
Update 13-01-2023 Upon request: Added a design with AA an AAA alone. (9V removed) TaLun, thanks for testing and the nice pictures!
Update 20-01-2023 Upon request: Added a small design. 1xAAA, 2xAA and 1x9V. Heigth reduced to 123mm.
| Battery-Holder-Ikea-Skadis.sldprt |
| Battery-Holder-Ikea-Skadis.stl |
| Battery-holder-small_1-AAA_2-AA_1-9V.iges |
| Battery-holder-small_1-AAA_2-AA_1-9V.sldprt |
| Battery-holder-small_1-AAA_2-AA_1-9V.stl |
| Battery_holder_2xAAA_3xAA_small.sldprt |
| Battery_holder_2xAAA_3xAA_small.stl |
| Battery_holder_2xAAA_3xAA_small_skadis.sldprt |
| Battery_holder_2xAAA_3xAA_small_Skadis.stl |
| Battery_Holder_AAAAA.sldprt |
| Battery_Holder_AAAAA.stl |
| Battery_Holder_R5.sldprt |
| Battery_Holder_R5.stl |
| Battery_Holder_R5.x_t |
