This is a Design By KVEL that I sliced into smaller parts and then Printed at 200% the original file size. I Only sliced and printed the pieces that I was going to use because I used a LED kit from Amazon.
I Glued the Pieces together. The batman logo cover i Glued and and then filled the cracks with Spot filler and sanded and painted black.
The LED kit I was able to make to wraps around the inside support piece because of doubling the size of the print. I probably only used 2 feet of the LED's that came in the 16ft kit that I ordered.
I hot glued the IR sensor and the power cord down the back and out the bottom.
centerbodywing.stl | 776.1KB | |
centerwingcover.stl | 308.8KB | |
centerwinginner.stl | 421.2KB | |
leftbodywing.stl | 637.2KB | |
leftwingcover.stl | 355.0KB | |
leftwinginner.stl | 322.4KB | |
rightbodywing.stl | 708.8KB | |
rightwingcover.stl | 350.8KB | |
ringwinginner.stl | 239.7KB |