I took inspiration from my Mark 85 and Mike Vicks Beyond concept to make this beautiful suit.
It was one of my first suits I made for my store.
I found this buried in my storage folder and thought it be great addition here.
As said its a early model and may need some extra work and proper sizing.
Mirror parts marked with a -L at the end of its name to get the right side.
Due be sure to size this properly.
Hand is free and can be found at my store - https://www.cgtrader.com/free-3d-print-models/hobby-diy/other/iron-man-hand-set
Enjoy
| Abs.stl | 75.5MB | |
| Arm-fins-L.stl | 18.9MB | |
| Back.stl | 109.9MB | |
| Behind-Knee-L.stl | 27.4MB | |
| Bicep-L.stl | 40.8MB | |
| Boot-Back-L.stl | 35.7MB | |
| Boot-Front-L.stl | 7.7MB | |
| Chest.stl | 100.1MB | |
| Cod.stl | 89.5MB | |
| Elbow-L.stl | 1.0MB | |
| Helm-Back.stl | 18.7MB | |
| Helm-Main.stl | 143.9MB | |
| Knee-L.stl | 3.8MB | |
| Lower-Arm-L.stl | 51.8MB | |
| Lower-Back.stl | 17.4MB | |
| Lower-Leg-L.stl | 53.8MB | |
| Neck-Front.stl | 12.0MB | |
| Neck-L.stl | 15.5MB | |
| Shoulder-L.stl | 26.8MB | |
| Trapezius-L.stl | 9.6MB | |
| Upper-Leg-L.stl | 90.4MB |
