We bought an anti-slip mat for our bathtub. Unfortunately, the mounting hooks are designed in such a way that the mat drips directly onto the wall. I designed a holder that drips the mat over the bathtub, meaning the edge stays dry. After drying, the holder is simply folded up and the dry mat lies against the wall.
In addition to the printed parts, you also need 8 mm diameter aluminum tubes (hardware store). These must be cut to length like this:
1x 321mm
1x 272mm
2x 250mm
2x 244mm
The used mat:
https://www.amazon.de/gp/product/B0C2NBZHZD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
| FixtureL.stl | 122.2KB | |
| FixtureR.stl | 122.2KB | |
| GleitlagerL.stl | 160.8KB | |
| GleitlagerR.stl | 164.6KB | |
| HängerL.stl | 238.9KB | |
| HängerR.stl | 238.9KB | |
| RolleSpacerL.stl | 213.1KB | |
| RolleSpacerR.stl | 212.0KB | |
| RolleWandL.stl | 454.0KB | |
| RolleWandR.stl | 454.0KB |
