Batgirl Bust 3D Printer Model
The file 'Batgirl Bust 3D Printer Model' is (stl) file type, size is 24.5 MB.
The file 'Batgirl Bust 3D Printer Model' is (stl) file type, size is 24.5 MB.
UPDATE AUG 2019:
I recently bought an Elegoo Mars and decided to print just the bust as my first test print. Other than an unnecessary auto generated support that was under her left bottom eyelash that removed a part of it when I tried to clip it off I could not be happier with the result. For you Mars users I used the exact same print settings as the test rook model that comes with the printer. Supports and sliced with Chitubox v1.5.0 and print time just under 6 hours.
I also fixed the cavity at the back of the head between the cowl and hair that was giving some people issues when printing and re-uploaded the .stl file
Please let me know if you have any issues with the new file. Thanks!
Bust and base are keyed separate shells. Images are Keyshot renders and I have not printed this out before so please let me know if any issues need to be fixed. The eyelashes might be a bit on the thin side but hopefully aren't too much of an issue.
| BATGIRL_wBlockBASE.stl |
| BATGIRL_WithBASE.stl |
