Bat Signal Night Light 3D Printer Model
The file 'Bat Signal Night Light 3D Printer Model' is (stl) file type, size is 2.5MB.
The file 'Bat Signal Night Light 3D Printer Model' is (stl) file type, size is 2.5MB.
Easy printing and easy assembling. Just need one GU10 lampholder two of M6 bolts with washer and nut, one M8 bolt with washer and nut, three m5 bolts with washer and nut, and a common lamp holder wired.
Print all parts, place the lamp holder and assemble the Reflector and the Holder (M6 bolts). Then assemble to the Base (M8 bolt).
place the lamps holder inside, with the wire through the hole of the reflector, then place the led lamp. Finally place the Bat and the Filter (M5 bolts).
Place the plug at the end, after placing the wire through the Reflector.
Please note that the batman logo is not going to be projected just for having this thing assembled. Lenses and light paths are complex and the projection and its definition depends on the light source, the alignment of the light paths and the distance from the light to the shape and to the plane you are projecting.
Hope you can enjoy this thing!
| Bat_Signal_Night_Lamp_-_Assembly.stl | 12.9MB | |
| Bat_Signal_Night_Lamp_-_Base.stl | 407.0KB | |
| Bat_Signal_Night_Lamp_-_Bat.stl | 1.4MB | |
| Bat_Signal_Night_Lamp_-_Holder.stl | 718.9KB | |
| Bat_Signal_Night_Lamp_-_Light_Filter.stl | 440.9KB | |
| Bat_Signal_Night_Lamp_-_Reflector.stl | 9.9MB |
