Bat Bunker 3D Printer Model
The file 'Bat Bunker 3D Printer Model' is (stl) file type, size is 855.5KB.
The file 'Bat Bunker 3D Printer Model' is (stl) file type, size is 855.5KB.
Bat Bunker is a 3D printable bat house designed by Whitefield Academy FIRST LEGO League Robotics Team #6128 (Team Blackout) to allow anyone with a 3D printer to create a bat habitat.
The interior and bottom plate include a voronio pattern allowing bats to easily climb in and roost. The opening on the bottom plate is wide enough for a bat to enter but small enough to keep predators out.
Printed in three parts - top, middle, and bottom. Print multiple middles to create a bat house as tall as you want.
From batcon.org...
All bat houses should be mounted at least 10 feet above ground, and 12 to 20 feet is better. Choose a sunny location on the East or South facing side of your house. Bat houses work best with at least 6-8 hours of direct sunlight (if only partial day sun is available- morning sun is preferable).
The team would like to thank the guys at 3Space (http://3space.us/) in Louisville, KY for their guidance in designing the bat house!
| Bat_House_Bottom_v4_Joined.stl | 349.3KB | |
| Bat_House_Threaded_Cap_V2.stl | 495.7KB | |
| Bat_House_Threaded_v3_-_Joined_-_B.stl | 1.4MB |
