Basket Smalls 3D Printer Model
The file 'Basket Smalls 3D Printer Model' is (stl) file type, size is 22.0MB.
The file 'Basket Smalls 3D Printer Model' is (stl) file type, size is 22.0MB.
Just what you need for a little game of b-ball!
See here for video: https://youtu.be/sNO8MSMIYjA
See here for stable downloads:
Basketball: https://than.gs/m/833255
Hoop: https://than.gs/m/833259
Backboard: https://than.gs/m/833268
Files for this basketball and hoop set are provided for standard and multicolour printing. Print all files as oriented, no supports needed.
The backboard has holes for hooks or magnets (1/4”x1/8” or 6mmx3mm neodymium). The line on the backboard is raised slightly in the standard print version to allow for a filament swap to make the line a different colour.
The halves of the balls are designed to be tight the first few times they snap together. To make them easier to snap together and apart simply file off a bit of the contact surfaces. For single colour prints you can colour the seam with a marker.
Model in picture was printed on a Snapmaker J1 in white and orange.
| Dual_Colour_Print_Backboard.stl | 537.5KB | |
| Dual_Colour_Print_Backboard_Line.stl | 49.9KB | |
| Dual_Colour_Print_Basket_Small_-_Seam.stl | 3.2MB | |
| Dual_Colour_Print_Basket_Small_-_Surfaces.stl | 2.9MB | |
| Dual_Colour_Print_Net.stl | 13.4MB | |
| Dual_Colour_Print_Rim.stl | 1.0MB | |
| Hook_10mm_Reach.stl | 200.3KB | |
| Hook_20mm_Reach.stl | 200.3KB | |
| Hook_30mm_Reach.stl | 200.3KB | |
| Standard_Print_Backboard.stl | 657.8KB | |
| Standard_Print_Basket_Small.stl | 3.0MB | |
| Standard_Print_Rim_and_Net.stl | 17.3MB |
