The idea with Basic Trailer Project is that you can combine standard parts to make your
own trailer design. It is built with screws and nuts so you can change, upgrade, repair
or take it apart and build something else.
Twist and turn the objects so that the print fits you and your printer.
And now.......
Fiat lux
or
Let there be light :-)
Well, at least some simple rear lights. Made for 3mm LED. Solder on cable (I use
telephone cord) and put it together with small selftapping screws.
I used transparent PLA for the lens, but you can of course use something else.
There are two different types of mounting plates depending on what height
you can have the lights. Mountingholes fits lower crossmember.
In this video you can see how it works with truck and trailer:
https://youtu.be/wwyBKh6TZkA
Parts needed:
3mm LED (white, red & yellow for Europe)
Electric cable
Small selftapping screws
| Rear_Light_3_base.stl | 357.1KB | |
| Rear_Light_3_lens.stl | 63.4KB | |
| Rear_Light_3_middle.stl | 354.8KB | |
| Rear_light_mounting_plate.stl | 101.9KB | |
| Rear_Light_Mount_Left.stl | 31.1KB | |
| Rear_Light_Mount_Right.stl | 103.6KB |
