The idea with Basic Trailer Project is that you can combine standard parts to make your
own trailer design. It is built with screws and nuts so you can change, upgrade, repair
or take it apart and build something else.
Twist and turn the objects so that the print fits you and your printer.
Here we have one type of suspension, leaf spring.
You can have one or several axles.
For one axle use front and rear spring mount.
For two or more axles add middle spring mount.
Drill template also has holes for fenders.
Watch video for details:
https://www.youtube.com/watch?v=RwmbYtY6y9Q
https://youtu.be/xuACkvaG3eU
Parts needed:
M2 threaded rod, washers and nuts (for fender).
M3 assortment, screws in different length, washers and nuts (axle mounting).
M4 assortment, screws in different length, washers and nuts.
Update 20170927:
Another type of suspension using the same leafspring,
mounted upside down
Going to use this on my containertrailer.
Update 20170919:
new drill templates with correct hole diameter
3 different complete sets of leaf springs:
15: blades are 1,5mm thick
18: blades are 1,8mm thick
20: blades are 2,0mm thick
new video
| Bushing.stl | 78.5KB | |
| Crossmember_Axle_w_Lower_Mount_1.stl | 704.0KB | |
| Drill_Template_Spring_Fender_Double.stl | 163.8KB | |
| Drill_Template_Spring_Fender_Lower.stl | 183.0KB | |
| Fender_Dual_Mount.stl | 3.7MB | |
| Leaf_Spring_1.stl | 504.6KB | |
| Leaf_Spring_2.stl | 337.9KB | |
| Leaf_Spring_3.stl | 342.2KB | |
| Leaf_Spring_Complete_15.stl | 1.2MB | |
| Leaf_Spring_Complete_18.stl | 1.2MB | |
| Leaf_Spring_Complete_20.stl | 1.2MB | |
| Spring_Mount_1.stl | 262.6KB | |
| Spring_Mount_10.stl | 168.6KB | |
| Spring_Mount_11.stl | 251.4KB | |
| Spring_Mount_12.stl | 153.4KB | |
| Spring_Mount_2.stl | 160.0KB | |
| Spring_Mount_3.stl | 120.5KB |
