This is a basic style Pokeball designed to be used with the 22mm momentary push button from Adafriut. Prints in 4 parts which assemble easily. Button then screws in with a tight fit. From there the electronics are up to you.
Button can be purchased from Adafriut at: https://www.adafruit.com/product/3424
| basic-ball-bottom.stl | 1.5MB | |
| basic-ball-top.stl | 7.1MB | |
| inner_cage_bottom.stl | 963.6KB | |
| inner_cage_top.stl | 950.0KB |
