This is a simple 2 piece, easy to use mold housing for dice, but you can use it for anything you want.
It has to pieces which you can attach together with clamps or clips, then fill with silicone over the dice. I use Cricut Transfer Tape on the bottom to seal it, double sided tape works too.
When the silicone is cured, you remove the transfer tape, flip it upside down so the registers/keys are on the opposite side, and give some space to make the lid of the mold, then clamp back together.
Super simple.
This is easily resized in your slicer or any editor for any size mold.
Printed with a Kobra 2 Neo
| Part_1.stl | 57.0KB | |
| Part_2.stl | 40.5KB |
