I have created a very simple stackable expositor for my Lego Speed Champs and other little cars. I have searched and the current models I did not like or I did not want to drill somewhere. I wanted to do something simple and fast to print and I have tried to use a minimum filament as possible due to have a little amount of PLA. To print 4 pillars takes approximately 1h 20 minutes and the base 1h each.
I am using Elegoo Neptune Pro 4, 0.4mm nozzle and Rapid PLA+ from Elegoo as well. I have used tree supports on the pillars to be printed vertically, haven't tried horizontally. Infill 5% on both. Default Brim from OrcaSlicer.
I will be working on new designs for pillars and new dimensions for both base and pillars.
I am leaving as well the CAD files from FreeCAD to allow you modify it at your will :)
| Lego_SpeedChamp_Expo_Base.FCStd | 82.3KB | |
| Lego_SpeedChamp_Expo_Base.stl | 10.0KB | |
| Lego_SpeedChamp_Expo_Pillar_45mm.FCStd | 42.3KB | |
| Lego_SpeedChamp_Expo_Pillar_45mm.stl | 9.3KB | |
| Lego_SpeedChamp_Expo_Pillar_50mm.FCStd | 42.3KB | |
| Lego_SpeedChamp_Expo_Pillar_50mm.stl | 9.3KB | |
| Lego_SpeedChamp_Expo_Pillar_55mm.FCStd | 42.4KB | |
| Lego_SpeedChamp_Expo_Pillar_55mm.stl | 9.3KB | |
| Lego_SpeedChamp_Expo_Pillar_60mm.FCStd | 42.5KB | |
| Lego_SpeedChamp_Expo_Pillar_60mm.stl | 9.3KB | |
| Lego_SpeedChamp_Expo_Pillar_65mm.FCStd | 45.0KB | |
| Lego_SpeedChamp_Expo_Pillar_65mm.stl | 9.3KB |
