Using https://www.thingiverse.com/thing:2536972 Corners,
we are now going to build a 20' tank container.
You always need the same amount of Corner and Corner_mirror, because the oval
hole in the corner should be longside in the upper and lower position of the container.
Edit 2018-07-23: Added thicker connection ring, 3mm, for those who want it.
Watch video for assembly.
Youtube video:
https://youtu.be/z7erAkc0neA
Parts needed:
Alu profiles
Some screws
Glue
Ev paint
| Container_tank_box.stl | 42.6KB | |
| Container_tank_bridge.stl | 1011.5KB | |
| Container_tank_connection.stl | 592.0KB | |
| Container_tank_connection_3mm.stl | 591.6KB | |
| Container_tank_end_part.stl | 9.2MB | |
| Container_tank_ladder.stl | 170.4KB | |
| Container_tank_ladder_mount.stl | 42.7KB | |
| Container_tank_manhole_end.stl | 396.7KB | |
| Container_tank_manhole_top.stl | 694.8KB | |
| Container_tank_middle_part.stl | 602.3KB | |
| Container_tank_mount_side.stl | 308.3KB | |
| Container_tank_mount_top_bottom.stl | 307.9KB |
