Basic Collar 3D Printer Model
The file 'Basic Collar 3D Printer Model' is (stl) file type, size is 272.1KB.
The file 'Basic Collar 3D Printer Model' is (stl) file type, size is 272.1KB.
This is iteration two and three of my design and this is by far the comfiest. The first design was two separate pieces in PLA with locks on both sides. This proved to be very uncomfortable and would sometimes become back heavy resulting in a choking feeling. Wrapping the PLA in soft material was also of little help.
I realized that a one piece design would be the strongest and least likely to fracture under stress (resulting in sharp edges) so I removed the second lock and printed this in 95A TPU. This makes it wonderfully flexible (it will flex almost flat) and is much more comfortable around the neck, even without a cloth cover.
| 3_Point.stl | 486.6KB | |
| Regular.stl | 448.5KB |
![Tusken Raider Mask Greeblies [LOW] 3D Printer Model](https://cdn.3axis.co/assets/06/00/9c/16/06009c16-d6e0-43c4-be60-5d50fa3bef80/images/2d6dac9d-06d5-4438-8313-80c8b7e16497_thumb.jpg)
