This is a basic ball lock connector post for homebrew keggerators. It is intended to be used for cleaning of lines. I wouldn't trust it for water tightness or food safety. I use mine with a simple pond pump and cleaning solution to clean my beer lines on my keggerator.
The part comes in two pieces and is meant to be glued together. I used ABS for the part and ABS glue to weld them together.
I find the post is very tight on my connectors. It might benefit from cutting the groove for the o-ring a little deeper. But mine works so I've just gone with it as is. If you improve on this please re-post and share!
The original file is a ViaCad file. I've also included DXF and STL files.
| Ball_Lock_HB_Lower.stl | 55.7KB | |
| Ball_Lock_HB_Upper.stl | 151.0KB | |
| Basic_Ball_Lock_Keg_Line_Connector_v3.dxf | 420.2KB | |
| Basic_Ball_Lock_Keg_Line_Connector_v3.vcp | 203.1KB | |
| Hose_Barb_EndBasic_Ball_Lock_Keg_Line_Connector_v3.dxf | 257.4KB |
