Basic And Brick Building Set 3D Printer Model
The file 'Basic And Brick Building Set 3D Printer Model' is (stl) file type, size is 43.6MB.
The file 'Basic And Brick Building Set 3D Printer Model' is (stl) file type, size is 43.6MB.
Using the base system you can slot in a variety of walls; each base can be locked next to other bases with interior locks; multiple bases can be stacked. Works with the Tudor and Wood Slat Sets
2019-01-22- adjust the 2nd floor LG Stair to make more room on the top landing
2019-01-24-fixed small thin wall error on base sets; added brick balcony height wall
work in progress- a scifi-tech set half way done- the bases will work with all sets so you can mix and match
| 2ndFloorOpen.stl | 73.1KB | |
| base.stl | 71.2KB | |
| BrickBalcony.stl | 3.5MB | |
| BrickBareLGStair.stl | 8.2MB | |
| BrickDoor.stl | 7.0MB | |
| BrickHalfwallLGDoor.stl | 5.5MB | |
| BrickInteriorDoor.stl | 9.4MB | |
| BrickInteriorLockWall.stl | 6.8MB | |
| BrickLGBasicStair.stl | 19.7MB | |
| BrickLGStair.stl | 20.6MB | |
| BrickSMDoor.stl | 7.5MB | |
| BrickStair.stl | 7.1MB | |
| BrickWall.stl | 9.3MB | |
| BrickWindow.stl | 7.6MB | |
| Door.stl | 2.2KB | |
| HalfwallLGDoor.stl | 1.8KB | |
| InsertDoor.stl | 17.7KB | |
| InsertLGDoor.stl | 17.6KB | |
| InteriorDoor.stl | 21.0KB | |
| InteriorLockWall.stl | 21.0KB | |
| LG2ndFloor.stl | 111.5KB | |
| LGBasicStair.stl | 158.5KB | |
| LGStair.stl | 38.3KB | |
| OriginalDoor.stl | 14.5KB | |
| OriginalLGDoor.stl | 14.4KB | |
| Roof.stl | 76.8KB | |
| SMDoor.stl | 2.2KB | |
| Stair.stl | 11.0KB | |
| Wall.stl | 1.5KB | |
| Window.stl | 2.4KB |
