Basic 1:45 Worm Gear With Cutouts For M8 Nut 3D Printer Model
The file 'Basic 1:45 Worm Gear With Cutouts For M8 Nut 3D Printer Model' is (stl) file type, size is 1.4MB.
The file 'Basic 1:45 Worm Gear With Cutouts For M8 Nut 3D Printer Model' is (stl) file type, size is 1.4MB.
Distance axle to axle is 44.3 mm.
Big gear has a radius of 35mm, thickness of 16.031mm.
Little worm gear has a radius of 23.8mm, length of 40mm.
cutout fits a pressed in M8 nut. (very tight to eliminate wobble)
(Feel free to Share your makes), also check out my make with this file
Basic 1:45 Worm Gear designed in Fusion 360 with cutouts for press-fitting two M8 Nuts into the Gear and one M8 Nut on both sides of the Worm.
v.2: Size of the hexagon for the M8 Nut was too small, enlarged from 14.3 to 15
Link for Google Drive:
F360 file(https://drive.google.com/open?id=1E-JgSM8BdW3hkDrrVlFJW3KOK9U2FgMq)
Lukas Ulmer
| Worm_1th_v2.stl | 727.3KB | |
| Worm_Gear_v2.stl | 2.7MB |
