I ran out of commercially bought baseboard clips while installing baseboard in my home. Instead of driving to the store again, I cloned the part and printed a bunch.
You can find more details and compatible parts in my article: https://funkyton.com/open-source-basboard-clip-system/
Original product EAN: 8711449065568 and 8711449065544
Print advice: For optimal strength, print the wall clip on the side, small nozzle, wall count 1 and 100% infill to get a really layer cross pattern (see picture). For the furniture leg clips, I printed these on the flat bottom side down, this works, but the clip hook that grabs around the baseboard not as strong when printed in this orientation.
I had 100% success with PLA+, and 100% failure with standard resin. If you have a resin that hardens with some elasticity, I am sure that will work, my resin is extremely brittle and didn't allow for any flex what so ever, and the clisp snapped.
| baseboard_clip_for_furniture_legs.stl | 41.9KB | |
| baseboard_clip_for_furniture_legs_with_10_mm_spacing.stl | 55.6KB | |
| baseboard_clip_for_furniture_legs_with_50_mm_spacing.stl | 46.4KB | |
| baseboard_clip_for_wall.stl | 49.3KB |
