Basalt Terrain Altar 3D Printer Model
The file 'Basalt Terrain Altar 3D Printer Model' is (stl,txt) file type, size is 83.0MB.
The file 'Basalt Terrain Altar 3D Printer Model' is (stl,txt) file type, size is 83.0MB.
Basalt Terrain Altar
Part of a multi piece terrain set for Chaos Lava pattern game mats.
This file is intended to be used as a piece of terrain for 28mm wargaming to provide cover and Line of Sight blocking for the center of the game table.
This file is not optimized for printing efficiency as built and requires about 4.5Kg of PLA to print and approximately 20 days to print at .16mm on a .06 nozzle with an Ender 3 Pro when split into 8 pieces.
(Used Windows 3d Builder to split)
This model is made for 28mm Heroic scale models.
Each Basalt column is wide enough to completely support a 32mm round base.
This model will need to be split into 8 pieces to print on an Ender 3 at this scale.
The base measures 455x375mm and is 235mm high.
To shrink to 25mm base size columns print at 75% and split into 4 pieces.
Recommended Ender 3 settings
.6mm Nozzle
Layer Height .16
Line Width.6
Wall Thickness 1.8mm
Top/Bottom Thickness .8mm
Ironing OFF
Generate Supports YES
Support Overhang 80%
Build Plate Adhesion: Raft (overhang under each step will need supports removed)
| BasaltTerrainAltar2.stl | 183.1MB | |
| ReadMe.txt | 1.2KB | |
| SOURCES.txt | 130.0B |
