This little end cap helps flatten out the ends of the magnetic barrier strip I got with my Shark IQ Robot, which tend to curl up. The strips are slightly less than 1" wide.
I did not need to use supports when printing.
Edit: added a 45 degree, 90 degree, and 180 degree connector to join pieces together.
| 45_Angle_Aftermkt_1.stl | 18.4KB | |
| 90_Angle_Aftermkt_1.stl | 13.6KB | |
| Connector_Aftermkt_1.stl | 18.1KB | |
| robot_vac_barrier_end.stl | 9.1KB |
