My girl's dollhouse came with only one bed so they asked for bunks. These were designed for Barbie sized dolls which is why they have strange looking proportions!
UPDATE Now with a more rounded bed-head (Head_V2). I've left the original so you can see the changes.
UPDATE Added an alternative version of the beams which use a simple lap joint.
You need to print 4 of each of the 2 beams and two of each of the "slats"
The original beams slot together and connect to sockets in the head and foot of the bunks. You will likely need to file the male parts as they are an intentionally tight fit. The alternative beams are simple lap joints which should be assembled with an adhesive and clamped to set. The "slats" are thin to save on print time and will also need attaching with your choice of adhesive. I glued all joints with two-part epoxy because the kids would soon work them loose otherwise.
| Assembled.skp |
| Assembled.stl |
| Bed_Beam_1.stl |
| Bed_Beam_2.stl |
| Bed_Beam_Lap_Joint.skp |
| Bed_Beam_Lap_Joint_a.stl |
| Bed_Beam_Lap_Joint_b.skp |
| Bed_Beam_Lap_Joint_b.stl |
| Bed_Slats_1.stl |
| Bed_Slats_2.stl |
| Foot.stl |
| Head.stl |
| Head_V2.skp |
| Head_V2.stl |
