Barad-Dur Dice Tower (Eye Of Sauron) 3D Printer Model
The file 'Barad-Dur Dice Tower (Eye Of Sauron) 3D Printer Model' is (stl,STL) file type, size is 1.3MB.
The file 'Barad-Dur Dice Tower (Eye Of Sauron) 3D Printer Model' is (stl,STL) file type, size is 1.3MB.
Barad-Dur Dice tower (Eye of Sauron) from Lord of the Rings. Slot in the back for a die to slide down. slide lets out into the flat chamber and rolls the die, protected so no dice roll off the table.
UPDATE Part 2 is too big for the ender, so I split it up into an ender-friendly 2a and 2b (print both and glue together). no support needed, should fit on your ender build platform now.
I printed it in 7 pieces (or 8 if you're using an Ender) to create the inner slot without any issues and so that minimal support/scaffolding would touch the shown faces, instructions below:
Part 1 and 2, the base: print oriented normally, no support needed.
Part 3 and 4, the second section up: print oriented normally. no support needed if you can bridge the arches, otherwise use support
Part 5, the third section up: print oriented upside-down. this will prevent the need for support on the sharp, downward-facing features
Part 6 and 7, The top, the Eye of Sauron: print each half radially inward side down so no support material is needed
the .stl of the full model is also available if you have a different printing strategy, or if you think you can print it all in one go. Follow me on Instagram to see the tower in action:
https://www.instagram.com/p/B-ak0ovBctj/
| Barad-Dur.stl | 5.2MB | |
| Barad-Dur_1_Base_Front.stl | 821.6KB | |
| Barad-Dur_2_Base_Back.stl | 1.3MB | |
| Barad-Dur_3_Low_Mid_Front.stl | 1021.1KB | |
| Barad-Dur_4_Low_Mid_Back.stl | 938.5KB | |
| Barad-Dur_5_High_Mid_Combined.stl | 996.5KB | |
| Barad-Dur_6_Top_Front.stl | 463.3KB | |
| Barad-Dur_7_Top_Back.stl | 462.2KB | |
| Ender_Friendly_Barad-Dur_2a_Base_Back.STL | 215.7KB | |
| Ender_Friendly_Barad-Dur_2b_Base_Back.STL | 51.7KB |
![Pi Cube 5 [remix] 3D Printer Model](https://res.3axis.co/25af9db7-bdc1-414f-9922-52d4ae8d0b55/images/a2e1fdd6-4146-43e7-8339-79b01f6c318e_thumb.jpg)
