Baofeng UV5R Good Charger + Stand 3D Printer Model
The file 'Baofeng UV5R Good Charger + Stand 3D Printer Model' is (stl) file type, size is 82.3KB.
The file 'Baofeng UV5R Good Charger + Stand 3D Printer Model' is (stl) file type, size is 82.3KB.
Do not pay attention to the lack of a lower part of the charging. I made a version of the author, then realized that the walkie-talkie was falling under its weight and made a remix. Here. In my case, one adapter powers two walkie-talkies. But this is in my case.
My Bao have not a charger. I try charged with 2 wires from station for UV82 - change + and - for any effect.
This original model can't stand. Added place.
I didn't use any chips from the dock of the original walkie-talkie!
Two wires directly to the battery contacts!
Recipe:
• Two copper wires
• Drill bit as needed for wire holes
• 10V 0.5A power supply or BAO adapter
• Electrical skills
• Thermal gun
• Isolation
Тhe search for the plus and minus occurs according to the indication on the power supply. It remains only to twist the wires and pour hot glue. The stand should also be filled with superglue or thermal glue.
There is no charging pad in the photo. I fixed this in my model, if you don't need it, download the original.
| Body.stl | 301.4KB | |
| cover2.stl | 237.3KB |
