Bao Dim Sum Basket – No Supports 3D Printer Model
The file 'Bao Dim Sum Basket – No Supports 3D Printer Model' is (stl) file type, size is 6.9MB.
The file 'Bao Dim Sum Basket – No Supports 3D Printer Model' is (stl) file type, size is 6.9MB.
NOT RECOMMENDED FOR ACTUAL COOKING!
This is just for fun Bao Dim Sum Basket.
It's big as modeled 180mm but can be printed as small as 60mm(the 3D print shown) (33.33% scale) and you should still be able to stack and close. Pay attention to your slicer to be sure the thin walls of the top of the basket are going to print. Updated model to make this a bit easier.
Made a new weave myself so no longer using any remix source.
Did some compromises on the design of the bottom shelf to make it so it would print with no supports.
Top is intended to be printed upside down. Flip and glue handle to the top.
Bottom ring goes around the base of the bottom so that you can stack more layers of bottom with rings. You don't need it if you have only a single basket.
Bao Babies shown in original model inside came from here:
https://www.myminifactory.com/object/3d-print-bao-baby-head-from-pixar-short-74422
https://www.myminifactory.com/object/3d-print-bao-baby-sitting-from-pixar-short-74420
https://www.myminifactory.com/object/3d-print-bao-baby-standing-from-pixar-short-74421
| BaoBasket_bottom_v7d_bottom.stl | 3.6MB | |
| BaoBasket_bottom_v7d_bottom_outer_ring.stl | 4.4MB | |
| BaoBasket_bottom_v7d_handle.stl | 515.8KB | |
| BaoBasket_bottom_v7d_top_nohandle.stl | 15.8MB |
