A simple to print robot chassis. Not locked in into any controller, you pick-em and stick-em!
Can use GM2 or GM3.
| bandit_battery_holder.stl | 13.8KB | |
| bandit_chassis_gm2.stl | 115.1KB | |
| bandit_chassis_gm3.stl | 147.5KB | |
| bandit_drag_main.stl | 7.7KB | |
| bandit_drag_tip.stl | 4.0KB | |
| bandit_hcsr04.stl | 28.4KB | |
| bandit_pin.stl | 5.4KB |
