Bambu X1C A1 Nozzle Brush Mount 3D Printer Model
The file 'Bambu X1C A1 Nozzle Brush Mount 3D Printer Model' is (stl) file type, size is 619.4KB.
The file 'Bambu X1C A1 Nozzle Brush Mount 3D Printer Model' is (stl) file type, size is 619.4KB.
Tired of the X1 bringing gunk and extruded plastic on the build plate and ruining your print? Need the nozzle cleaner to ACTUALLY clean the nozzle and provide reliable, stress free starting of prints? I have the solution.
This is a mount for the Bambu X1C to utilize a A1 nozzle brush. 3D print this bracket out, then cut the A1 brush to appropriate size, and replace the existing nozzle cleaner with this one.
Use this brush: https://us.store.bambulab.com/products/heatbed-nozzle-wiper-a1?variant=41587270123656
I found some ideas online, but I was not satisfied with their part and it seemed like a unfinished product, so I designed and built my own.
In the raw files, I also made a “TALL” version that is 0.5mm taller than the regular one if it is too short. I would recommend printing in ABS or some other heat resistant/durable material. After screwing the bracket on, I would recommend putting an additional drop of superglue under the A1 brush to make sure it does not come off during use.
| A1_Brush_Mount.stl | 834.8KB | |
| A1_Brush_Mount_TALL.stl | 834.8KB |
