This is an auxiliary light intended to be used on a Bambu A1 Mini to assist in viewing the nozzle. The A1 Mini has a light but it is up higher an does not get a lot of light to the nozzle area. This light sits on the right side of the printer an sits low so the light can shine on the nozzle better.
It is simply powered by plugging it into one of the AMS connector jack on the right side of the printer.
The printer has an extended baseplate that slides under the printer to hold the light snugly.
The lights head is adjustable to align the light where you want it. There are also 2 extra ball shafts if you want to have the light reach higher.
Download files include stl and step files of all parts as well as 3mf files. There is also a "doc" file with a list of parts and more info.
| A1_Mini_Light_-_All_Parts.3mf | 1.3MB | |
| A1_Mini_Light_-_Ball_Shaft.step | 35.0KB | |
| A1_Mini_Light_-_Ball_Shaft.stl | 294.2KB | |
| A1_Mini_Light_-_Base_Plate.step | 28.8KB | |
| A1_Mini_Light_-_Base_Plate.stl | 36.8KB | |
| A1_Mini_Light_-_Knob.step | 91.5KB | |
| A1_Mini_Light_-_Knob.stl | 121.9KB | |
| A1_Mini_Light_-_Light_Head.step | 105.1KB | |
| A1_Mini_Light_-_Light_Head.stl | 129.8KB | |
| A1_Mini_Light_-_Main_Body.step | 523.4KB | |
| A1_Mini_Light_-_Main_Body.stl | 445.4KB | |
| A1_Mini_Light_-_Nut.step | 473.2KB | |
| A1_Mini_Light_-_Nut.stl | 388.5KB | |
| A1_Mini_Light_-_Taller_Ball_Shaft.step | 35.8KB | |
| A1_Mini_Light_-_Taller_Ball_Shaft.stl | 291.5KB | |
| A1_Mini_Light_-_Tall_Ball_Shaft.step | 35.8KB | |
| A1_Mini_Light_-_Tall_Ball_Shaft.stl | 301.7KB | |
| A1_Mini_Light_Document_V2.docx | 4.0MB | |
| Ball_Shaft.3mf | 219.3KB | |
| Knob.3mf | 174.3KB | |
| Light_Head.3mf | 96.4KB | |
| Long_Ball_Shaft.3mf | 195.1KB | |
| Main_Body.3mf | 264.8KB | |
| Main_Body_Baseplate.3mf | 34.8KB | |
| Medium_Ball_Shaft.3mf | 209.6KB | |
| Nut.3mf | 283.5KB |
