Direct drive for FLSUN SR with the removable Bambu A1 hotend and LGX lite or HGX V2 extruder. Subject to changes!
Original 4010 fans can be used
Adapters if use two 5015
and adapter to use CPAP (not tested)
3010 Fan for hotend heatsink
Insert the end balls under pressure into the effector-house ensuring that they reach the stop
Use a small piece of Teflon tubing between house and extruder
Two versions effector-house. With or without M3 Brass nuts inserts
Holes mount for Fysetc ADXL345 accelerometer
To dismantle and assemble the hotend, dismantle the ductshield, remove the lock and use your finger to rotate 45 degrees and extract!
| 5015fan-support.stl | 56.3KB | |
| 5015fanInserts_-_support.stl | 56.3KB | |
| CPAP.stl | 14.0MB | |
| fan5015supportL.stl | 6.6MB | |
| fan5015supportR.stl | 6.6MB | |
| LGXV3-effector-house.stl | 2.0MB | |
| LGXV3Inserts_-_effector-house_1.stl | 2.0MB | |
| NewDuct20.stl | 3.3MB | |
| NewDuct20shield.stl | 2.7MB |
