Balolo Headphone Hanger 3D Printer Model
The file 'Balolo Headphone Hanger 3D Printer Model' is (stl) file type, size is 67.8KB.
The file 'Balolo Headphone Hanger 3D Printer Model' is (stl) file type, size is 67.8KB.
MY FRIST EVER CREATION.
This is a headphone hanger specifically modelled after/for the "Balolo Setup Cockpit" desk shelf/monitor stand that attaches to their pre-fabricated screw mounts using Black M5x12 button head hex bolts. (You can use any M5x12 bolts of course, but those are the exact type that come with the shelf)
There is a cable eyelet towards the base to feed a charging cable through for those using wireless sets.
While I did design this specifically for my Balolo desk shelf, this hanger could also be used on any desk shelf/desk with an appropriately sized screw of course.
CAUTION: there does seem to be a slight bend to the stand with heavier sets of headphones but they still hold up well. Can thicken the main support if you feel necessary.
| Desk_Shelf_Headphone_Hanger.stl | 213.6KB |
