Balloon Turbo Car 3D Printer Model
The file 'Balloon Turbo Car 3D Printer Model' is (stl) file type, size is 3.5MB.
The file 'Balloon Turbo Car 3D Printer Model' is (stl) file type, size is 3.5MB.
My 3d printed turbine needed an application, so I thought a car would be fun.
I used some components from other projects:
turbine: https://www.thingiverse.com/thing:4725033
the bearing: https://www.thingiverse.com/thing:3134159
snap connection: https://www.thingiverse.com/thing:3196013
tires: https://www.thingiverse.com/thing:3223605
To print it I used prusa slicer 0.15mm quality PLA setting. No supports or brim. But good bed adhesion is needed.
The bearings need some revolutions unteil they run smoothly. Specially the turbine needs tight tolerances and requires some movement before it runs well. Two tools are included to help.
For lower friction a silicone spray is recomended.
| chassis.stl | 702.9KB | |
| tool1.stl | 362.4KB | |
| tool2.stl | 481.1KB | |
| turbine.stl | 5.1MB | |
| wheel.stl | 1.9MB | |
| wheel_with_gear.stl | 2.3MB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)