Balloon Stick, Cup And Stand 3D Printer Model
The file 'Balloon Stick, Cup And Stand 3D Printer Model' is (stl) file type, size is 2.8MB.
The file 'Balloon Stick, Cup And Stand 3D Printer Model' is (stl) file type, size is 2.8MB.
Stick
The balloon stick is available in two formats (solid and hollow) and three sizes (30cm, 20cm and 10cm).
I highly recommend using plate adhesion when printing the sticks to reduce z-wobble and prevent the sticks from falling over mid-print.
Cup
The balloon cup is available in three formats (3 slots, 4 slots and 5 slots). I recommend 3 slots as the best and most standard option.
Stand
The balloon stand is available in two formats (6 points and 8 points). The more points you have the denser your balloon cluster will be, use whatever you prefer. If you are finding the cluster to be to dense for your balloon size then consider using shorter sticks on the outer ring and longer sticks on the inner ring.
| cup_3_slots.stl | 2.2MB | |
| cup_4_slots.stl | 2.7MB | |
| cup_5_slots.stl | 3.1MB | |
| stand_6_points.stl | 3.0MB | |
| stand_8_points.stl | 3.4MB | |
| stick_10cm_hollow.stl | 113.5KB | |
| stick_10cm_solid.stl | 37.8KB | |
| stick_20cm_hollow.stl | 116.9KB | |
| stick_20cm_solid.stl | 38.3KB | |
| stick_30cm_hollow.stl | 113.6KB | |
| stick_30cm_solid.stl | 38.4KB |
