Description Files (4)

Summary

Introducing the Baldercase series

This is the first of the cases in the Baldercase series. Baldercases are ITX Cases for different purpouses.

Specs

Dimensions: 250x190x100mm
Filament to print in: Any filament that is good against heat (PETG, Carbon fiber etc.)
Motherboard Support: Mini-ITX
Front-IO: 2x USB-A 3.0
Drive bays: None
Fan support: None
CPU Cooler Height: Not tested, under 70mm recommended
GPU Compatibility: None
Power supply type: FlexATX

Components

3D Files

Body
Side Panel
Button
Switch Holder

Screws

4x Motherboard Screws (Included with Motherboard)
4x Motherboard Standoffs (Included with Motherboard)
4x PSU Screws (Included with PSU)
2x M3 Screws for Side Panel: Aliexpress | Amazon.de | Amazon.com | Amazon.co.uk
2x M3 Screws for switch holder: Aliexpress | Amazon.de | Amazon.com | Amazon.co.uk

Electronic Components

1x Mechanical Keyboard Switch: Aliexpress | Europe | U.S. | UK
1x USB-3 Cable to motherboard header: Aliexpress

Assembly

Put the keyboard switch inside the hole on the switch holder
Put the Switch holder inside the case, and screw it in with 2x M3 screws.
Put the button on the switch
Put the side panel on the case and slide it
Screw the side panel on with 2x M3 screws

Baldercase_2.0_Body.stl	634.6KB
Baldercase_2.0_Button.stl	22.7KB
Baldercase_2.0_Side_panel.stl	1.2MB
Baldercase_2.0_Switch_holder.stl	27.7KB

Baldercase 2.0 ITX Case 3D Printer Model