Attached are the entire file (Base and pieces), A full piece .stl, Full base .stl, Half base .stl, and each individual piece (11 parts)
The base is 285mm x 114mm, just glue both halves together if you need!
Print time for the base was 7 hours (2 halves) and pieces are 12 hours. I'd recommend at least 3 sets of pieces as 2 people can "easily" complete the game.
The base is 1" and the pieces are 0.98" so the pieces fit in very nice!
This is my first upload! Enjoy.
| balance_game_v3.stl | 157.3KB | |
| Base_Full.stl | 75.0KB | |
| Base_Half.stl | 58.1KB | |
| Pieces_Full.stl | 50.7KB | |
| Piece_1.stl | 1.6KB | |
| Piece_10.stl | 6.3KB | |
| Piece_11.stl | 5.4KB | |
| Piece_2.stl | 2.6KB | |
| Piece_3.stl | 3.6KB | |
| Piece_4.stl | 4.0KB | |
| Piece_5.stl | 5.0KB | |
| Piece_6.stl | 5.4KB | |
| Piece_7.stl | 4.6KB | |
| Piece_8.stl | 6.7KB | |
| Piece_9.stl | 6.3KB |
