Bakugan: Infinity Drago (Outdated) 3D Printer Model
The file 'Bakugan: Infinity Drago (Outdated) 3D Printer Model' is (stl) file type, size is 2.7MB.
The file 'Bakugan: Infinity Drago (Outdated) 3D Printer Model' is (stl) file type, size is 2.7MB.
Version 2 is available! https://www.thingiverse.com/thing:6400145
If you make one, tag me on instagram at @NoShayminFeeding, I love to see people make them!
Same size as B2 Bakugan: 32mm. Reused pins, springs, and magnet from a broken B2 Drago. 1 extra pins are needed for the inner mechanism. You can also use an Apollonir and it will have an extra pin from its tail.
Pin holes are set to 1.85mm diameter. That is fit for bakugan pins on my Pursa Mini (plus). Highly recommend doing your own tests and see what size works best on your printer before printing all the pieces.
More photos and video of it opening!
https://www.instagram.com/p/Cmk2lwPNWA9/?utm_source=ig_web_copy_link
Update 2023/02/25: New Head has been added! with new detail to the head and horn (mouth, eyes, etc.). Its the same shape so you can just swap out the old one for the new head without needing to reprint the whole body. New head are listed as "detailed _____" old design is still available if preferred.
| Horn.stl | 102.1KB | |
| Horn_Detail.stl | 181.8KB | |
| Horn_Detail_with_rod.stl | 184.3KB | |
| Horn_Rod.stl | 84.0KB | |
| Inside_Hook.stl | 96.8KB | |
| Left_Body.stl | 1.0MB | |
| Left_Head.stl | 611.7KB | |
| Left_Head_Detailed.stl | 578.2KB | |
| Left_Leg.stl | 363.9KB | |
| Left_Wing.stl | 792.2KB | |
| Neck.stl | 107.6KB | |
| Right_Body.stl | 950.6KB | |
| Right_Head.stl | 611.7KB | |
| Right_Head_Detailed.stl | 578.2KB | |
| Right_Leg.stl | 363.9KB | |
| Right_Wing.stl | 792.2KB |
