Bag Wheels 3D Printer Model
The file 'Bag Wheels 3D Printer Model' is (3mf,stl) file type, size is 2.9MB.
The file 'Bag Wheels 3D Printer Model' is (3mf,stl) file type, size is 2.9MB.
Recently, one of the wheels on my Stanley backpack broke, so I decided to design a replacement based on the original model of the backpack. I printed the entire model with 5 perimeters and 20% infill. So far, I haven't had any issues with this configuration, but feel free to add more strength if you wish. Adapter piece is designed to be printed withuot supports, but i recomend to use supports in both to obtain better quality pieces. Wheel needs supports fot the bearing area. Recommended PETG, but PLA should works fine too.
Required materials:
2x Threaded rods with an 8mm diameter and 67mm length
8x 8mm washers
4x 8mm nuts
6x 3-5mm screws for assembly
4x 22mm bearings
| StanleyWheel.3mf | 771.5KB | |
| StanleyWheelSupport.3mf | 918.0KB | |
| Support.stl | 559.2KB | |
| Wheel.stl | 2.5MB |
