These models can be seen in action here https://youtu.be/46dk_y27HCs
This bag hanger comes in various block sizes but uses the same clips. The 3D Print uses a chamfer so even an uncalibrated printer should be successful in printing these. Use horizontal expansion to reduce the hook size if you find its too tight to press into the block. Most printers wont have any problem with default slicer settings.
The bag hangers allow you to take any zipper based plastic bag and hang it up on a pegboard or hook. Organize your workshop, garage or classroom with these bag hangers. You can watch an entire video on how these bags can be used for anything and a single hanger can hold 4 pounds or more!
Print as-is no supports are required. .6 nozzles print this extra fast! If you choose to have heavy weight in your bags please use a smaller .15 layer height for extra strength. PLA filament works great. I printed these in eSun orange https://www.amazon.com/gp/product/B01EKEMA2M?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=384670947fdd94c3327e57a72583ae0b&language=en_US&ref_=as_li_ss_tl
| Bag_Block_70mm.stl | 7.3MB | |
| Bag_Hook.stl | 1.3MB | |
| Hanger_Block_100mm.stl | 8.5MB | |
| Hanger_Block_150mm.stl | 10.6MB | |
| Hanger_Block_35mm.stl | 5.9MB |
