Bacteria (Prokaryotic) Cell 3D Printer Model
The file 'Bacteria (Prokaryotic) Cell 3D Printer Model' is (STL) file type, size is 2.6MB.
The file 'Bacteria (Prokaryotic) Cell 3D Printer Model' is (STL) file type, size is 2.6MB.
This model represents the typical structure and components of a prokaryotic cell.
1) For minimized bleeding of darker colours (such as blue, red and dark green) into lighter colours, it is recommended that users set the variable transition lengths to strong and increase the “maximum transition length” (Project Settings>Transition>Variable Transition Lengths).
2) To avoid the small pieces of the tail (flagellum) on the first layer from peeling off the build plate, it is recommended that users add a brim (Project Settings>First Layer>Skirt/Brim). To apply a brim rather than a skirt, set the “horizontal gap from part” to 0. Based on how small the model is scaled, more outlines and layers can be helpful (the smaller the part, the more outlines and layers suggested).
3) Print Difficulty: 3/5
| blue_-_cell_wall_-_prokaryotic_cell.STL | 432.9KB | |
| dark_green_-_flagellum_-_prokaryotic_cell.STL | 692.5KB | |
| dark_yellow_-_plasma_membrane_mesosome_and_pilus_-_prokaryotic_cell.STL | 872.7KB | |
| light_green_-_capsule_-_prokaryotic_cell.STL | 430.3KB | |
| orange_-_inclusions_-_prokaryotic_cell.STL | 733.3KB | |
| purple_-_nucleoid_and_plasmids_-_prokaryotic_cell.STL | 3.1MB | |
| red_-_ribosomes_-_prokaryotic_cell.STL | 362.6KB | |
| yellow_-_cytoplasm_-_prokaryotic_cell.STL | 216.9KB |
