A simple foldable stove stand compatible with most gas canisters (109mm and 90mm).
It seems there is small variations in canisters diameter depending the brand used. You may trimm a bit the legs of print the part a little smaller on the length axis.
Print 3x feet.stl and 1x center.stl
You will need 3 M3x15 screw (M3x12 works fine too).
Screws goes head up, tighten as needed.
Tripod version:
http://www.thingiverse.com/thing:1484798
28/03/2016 uploaded Inventor CAD files
08/09/2016 uploaded improved center V2 part and 100mm short feet (20mm shorter than the original) for best fit in smaller pots
| center.ipt | 213.0KB | |
| center.stl | 83.1KB | |
| center_V2.ipt | 164.0KB | |
| center_V2.stl | 67.5KB | |
| feet.ipt | 316.5KB | |
| feet.stl | 55.2KB | |
| feet_short.ipt | 312.5KB | |
| feet_short.stl | 51.1KB | |
| Stove_stand.iam | 120.5KB |
